Description

Modernize your fleetside 60 – 66 c10 with these carved ghost halo taillights. They come standard with a removable billet aluminum bezel and billet mount.

Features include:

• Sequential amber turns in the top pocket
• Standalone reverse light in the bottom pocket
• Animated dual halo parking lights
• Animated dual halo brake lights with brake light in the top pocket
• Startup/shutdown animations
• Showmode

Modifications to the truck are required for the installation and usage of these taillights. The taillight pocket must be cut open so that only 1/4 an inch of rolled lip is exposed in the taillight opening. The back of the bed stake must also be cut to fit the light. In addition, two holes are to be drilled in the side to mount the taillights. The billet mounts are oversized to assist in covering any drilled holes that were made too large. Removing the bezel reveals two dimples integrated into the face of the taillight housing with is used to assist in locating the holes to drill in the side. See gallery photos for more details on required cutting and drilling.

Wiring modifications are also required. These tails require a 5A fused const. battery hot, ignition/keyed hot, switched hot, and a standalone brake signal wire for full functionality.

LED flashers required.